View CHE1270-QAG20_8469091.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

che1270-qag rohs compliant ref. : dsche1270-qag0329 - 25 nov 10 1/12 specifications subject to change without notic e united monolithic semiconductors s.a.s. route dpartementale 128 - bp46 - 91401 orsay cedex france tel.: +33 (0) 1 69 33 03 08 - fax: +33 (0) 1 69 33 03 09 5-44ghz detector gaas monolithic microwave ic in smd leadless packag e description the che1270-qag is a detector that integrates a matched detector diode (vdet) and a reference diode (vref). it is designed for a wide range of applications where an accurate transmitted power control is required, typically commercial communication systems. the circuit is manufactured with a schottky diode mmic process, 1m gate length, via holes through the substrate and air bridges. it is supplied in rohs compliant smd package. vdet rf in che1270 vref matching dc vdet rf in che1270 vref matching dc main features broadband performances: 5-44ghz 30db dynamic range esd protected 16l-qfn3x3 msl1 transmitted power detection (mv) 1 10 100 1000 10000 -20 -15 -10 -5 0 5 10 15 vdetect = vref - vdet (mv) input power (dbm) 5ghz 6ghz 7ghz 8ghz 9ghz 10ghz 12ghz 17ghz 22ghz 27ghz 32ghz 37ghz 40ghz 42ghz 44ghz main characteristics tamb.= +25c, vdc = +4.5v symbol parameter min typ max unit freq frequency range 5 44 ghz dr dynamic range 30 db rl return loss -10 db ums e1270 yyww
che1270-qag 5-44ghz detector ref. : dsche1270-qag0329 - 25 nov 10 2/12 specifica tions subject to change without notice route dpartementale 128, bp46 - 91401 orsay cedex - france tel.: +33 (0) 1 69 33 03 08 - fax: +33 (0) 1 69 33 03 09 main characteristics tamb.= +25c, vdc = +4.5v symbol parameter min typ max unit f frequency range 5 44 ghz dr dynamic range (for input power detection) 30 d b ipd input power detection -15 15 dbm vdetect voltage detection vref C vdet from ipd_min to ipd_max 5 2200 mv rl return loss (5 C 10ghz) return loss (10 C 12ghz) return loss (12 C 36ghz) return loss (36 C 44ghz) -5 -8 -10 -8 -4 -7 -9 -7 db db db db vdc bias voltage 4.5 v idc bias current 50 70 90 m a these values are representative of onboard measurem ents as defined in the paragraph evaluation mother board" with 27k resistor in parallel on vdet and vref pads.
5-44ghz detector che1270-qag ref. : dsche1270-qag0329 - 25 nov 10 3/12 specifications subject to change without notice route dpartementale 128, bp46 - 91401 orsay cedex - france tel.: +33 (0) 1 69 33 03 08 - fax: +33 (0) 1 69 33 03 09 absolute maximum ratings (1) tamb.= +25c symbol parameter values unit vdc bias voltage 6 v p_max maximum power 18 dbm ta operating temperature range -40 to +85 c tstg storage temperature range -55 to +155 c (1) operation of this device above anyone of these par ameters may cause permanent damage.
che1270-qag 5-44ghz detector ref. : dsche1270-qag0329 - 25 nov 10 4/12 specifica tions subject to change without notice route dpartementale 128, bp46 - 91401 orsay cedex - france tel.: +33 (0) 1 69 33 03 08 - fax: +33 (0) 1 69 33 03 09 typical measured performances tamb.= +25c, vdc = +4.5v 27k resistor in parallel on vdet and vref pads (see no tes). board losses de-embedded (result given in the packa ge access plan) return loss measurement refer to the definition of the sij reference plane s -28 -26 -24 -22 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 freq (ghz) return loss (db)
5-44ghz detector che1270-qag ref. : dsche1270-qag0329 - 25 nov 10 5/12 specifications subject to change without notice route dpartementale 128, bp46 - 91401 orsay cedex - france tel.: +33 (0) 1 69 33 03 08 - fax: +33 (0) 1 69 33 03 09 typical measured performances tamb.= +25c, vdc = +4.5v 27k resistor in parallel on vdet and vref pads (see no tes). board losses not de-embedded (result given in the p lan of connectors) refer to the proposed land pattern & board 96272-b (see "evaluation mother board") power measurements versus input power 1 10 100 1000 10000 -20 -15 -10 -5 0 5 10 15 vdetect = vref - vdet (mv) input power (dbm) 5ghz 6ghz 7ghz 8ghz 9ghz 10ghz 12ghz 17ghz 22ghz 27ghz 32ghz 37ghz 40ghz 42ghz 44ghz
che1270-qag 5-44ghz detector ref. : dsche1270-qag0329 - 25 nov 10 6/12 specifica tions subject to change without notice route dpartementale 128, bp46 - 91401 orsay cedex - france tel.: +33 (0) 1 69 33 03 08 - fax: +33 (0) 1 69 33 03 09 transmitted power detection versus frequency @ -15 and 0dbm input power 0 50 100 150 200 250 300 350 5 10 15 20 25 30 35 40 vdetect = vref-vdet (mv) freq (ghz) pin=-15dbm pin=0dbm transmitted power detection versus frequency @ +11 and +15dbm input power 500 1000 1500 2000 5 10 15 20 25 30 35 40 vdetect = vref - vdet (mv) freq (ghz) pin=11dbm pin=15dbm
5-44ghz detector che1270-qag ref. : dsche1270-qag0329 - 25 nov 10 7/12 specifications subject to change without notice route dpartementale 128, bp46 - 91401 orsay cedex - france tel.: +33 (0) 1 69 33 03 08 - fax: +33 (0) 1 69 33 03 09 typical measured performances tamb = +25c, tcold = -40c, thot = +85c, vdc = +4 .5v board losses not de-embedded (result given in the p lan of connectors) transmitted power detection versus frequency and te mperature @ 5 and 22ghz 1 10 100 1000 10000 -20 -15 -10 -5 0 5 10 15 vdetect = vref - vdet (mv) input power (dbm) 5ghz 22ghz -40c +25c +85c -40c +25c +85c transmitted power detection versus frequency and te mperature @ 32 and 44ghz 1 10 100 1000 10000 -20 -15 -10 -5 0 5 10 15 vdetect = vref - vdet (mv) input power (dbm) 32ghz 44ghz -40c +25c +85c -40c +25c +85c
che1270-qag 5-44ghz detector ref. : dsche1270-qag0329 - 25 nov 10 8/12 specifica tions subject to change without notice route dpartementale 128, bp46 - 91401 orsay cedex - france tel.: +33 (0) 1 69 33 03 08 - fax: +33 (0) 1 69 33 03 09 typical measured performances tamb = +25c, tcold = -40c, thot = +85c, vdc = +4 .5v board losses not de-embedded (result given in the p lan of connectors) transmitted power detection versus frequency and te mperature @ -15 and 0dbm input power 0 50 100 150 200 250 300 350 5 10 15 20 25 30 35 40 vdetect = vref-vdet (mv) freq (ghz) pin=-15dbm pin=0dbm -40c +25c +85c -40c +25c +85c transmitted power detection versus frequency and te mperature @ +11 and +15dbm input power 500 1000 1500 2000 5 10 15 20 25 30 35 40 vdetect = vref-vdet (mv) freq (ghz) pin=11dbm pin=15dbm -40c +25c +85c -40c +25c +85c
5-44ghz detector che1270-qag ref. : dsche1270-qag0329 - 25 nov 10 9/12 specifications subject to change without notice route dpartementale 128, bp46 - 91401 orsay cedex - france tel.: +33 (0) 1 69 33 03 08 - fax: +33 (0) 1 69 33 03 09 package outline (1) matt tin, lead free (green) 1- nc 7- vref 13- nc units : mm 2- gnd (2) 8- nc 14- nc from the standard : jedec mo-220 3- rf in 9- gnd (2) 15- nc (vggd) 4- gnd (2) 10- nc 16- nc 17- gnd 5- vdet 11- gnd (2) 6- dc 12- nc (1) the package outline drawing included to this data- sheet is given for indication. refer to the application note an0017 ( http://www.ums-gaas.com ) for exact package dimensions. (2) it is strongly recommended to ground all pins mark ed gnd through the pcb board. ensure that the pcb board is designed to provide th e best possible ground to the package. e1270
che1270-qag 5-44ghz detector ref. : dsche1270-qag0329 - 25 nov 10 10/12 specific ations subject to change without notice route dpartementale 128, bp46 - 91401 orsay cedex - france tel.: +33 (0) 1 69 33 03 08 - fax: +33 (0) 1 69 33 03 09 definition of the sij reference planes the reference planes used for sij measurements given above are symmetrical from the symmetrical axis of the package (see drawing beside). the input and output reference planes are located at 2.65mm offset (input wise and output wise respectively) from this axis. then, the given sij parameters incorporate the land pattern of the evaluation motherboard recommended in paragraph "evaluation mother board". notes vdet rf in che1270 vref matching dc 27k w ww w 27k w ww w vdet rf in che1270 vref matching dc vdet rf in che1270 vref matching dc 27k w ww w 27k w ww w recommended external resistors assembly 27k resistors in parallel with vdet and vref pads are recommended to provide the best behaviour in the whole operating temperature range. as the voltage detection is the difference between vref and vdet, the external resistor value should be identical on these two ports. for information, a variation of 3% leads around 1mv variation of detected voltage. due to esd protection circuits on rf input, an exte rnal capacitance might be requested to isolate the product from external voltage that coul d be present on the rf access. esd protections are also implemented on vdet and vr ef accesses. the dc connection (on dc pad) does not include any decoupling capacitor in package, therefore it is mandatory to provide a good externa l dc decoupling on the pc board, as close as possible to the package.
5-44ghz detector che1270-qag ref. : dsche1270-qag0329 - 25 nov 10 11/12 specifications subject to change without notice route dpartementale 128, bp46 - 91401 orsay cedex - france tel.: +33 (0) 1 69 33 03 08 - fax: +33 (0) 1 69 33 03 09 evaluation mother board compatible with the proposed footprint. based on typically ro4003 / 8mils or equivalent. using a micro-strip to coplanar transition to acce ss the package. recommended for the implementation of this product on a module board. decoupling capacitors of 10nf 10% are recommended for all dc accesses. see application note an0017 for details. capacitor 10nf resistor 27k w (not used) vdet dc vref capacitor 10nf resistor 27k w (not used) capacitor 10nf resistor 27k w (not used) vdet dc vref
che1270-qag 5-44ghz detector ref. : dsche1270-qag0329 - 25 nov 10 12/12 specific ations subject to change without notice route dpartementale 128, bp46 - 91401 orsay cedex - france tel.: +33 (0) 1 69 33 03 08 - fax: +33 (0) 1 69 33 03 09 recommended package footprint refer to the application note an0017 available at http://www.ums-gaas.com for package foot print recommendations. smd mounting procedure for the mounting process standard techniques involv ing solder paste and a suitable reflow process can be used. for further details, see appli cation note an0017. recommended environmental management refer to the application note an0019 available at h ttp://www.ums-gaas.com for environmental data on ums package products. recommended esd management refer to the application note an0020 available at h ttp://www.ums-gaas.com for esd sensitivity and handling recommendations for the um s package products. ordering information qfn 4x4 rohs compliant package: che1270-qag/xy stick: xy = 20 tape & reel: xy = 21 information furnished is believed to be accurate an d reliable. however united monolithic semiconductors s.a.s. assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by impli cation or otherwise under any patent or patent rights of united monolithic semiconductors s.a.s. . specifications mentioned in this publication are subject to change without notice. this publication supersedes and re places all information previously supplied. united monolithic semiconductors s.a.s. products are not authorised for use as critical components in life support devices or s ystems without express written approval from united monolithic semiconductors s.a.s.

▲Up To Search▲

Price & Availability of CHE1270-QAG20

	To Download CHE1270-QAG20 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .